Audio Dynamics | Sound Quality Car Audio

Cart
Checkout
My Account
Mobile Showroom
Dealer Locator

7574 Hwy F, Farmington, MO, 63640

(573) 756-2049

Menu

Speakers
Pro Audio
Marine
Amplifiers
DSP
- DSP Archives
Subwoofers
Support

Sign up for our Newsletter to receive sale and product updates!

First Name
Last Name
Email address:

Leave this field empty if you're human:

PERFECT 3,000W BASS PACKAGE 🏆 4000 Series 12" t

PERFECT 3,000W BASS PACKAGE 🏆 4000 Series 12" takes small vented enclosure 👍 X3K.1 delivers over 3,000W @ 1 ohm 💪 X3K.1 stays very cool in the OVERBUILT X SERIES HEATSINK 😎

#audiodynamics #vault12vmarketing #spl #caraudiosubwoofers

5 CHANNEL 👍 150x4 @4 ohm PLUS 1500Wx1 @1 ohm 🤯 PERFECT POWER 💪

#audiodynamics #vault12vmarketing #5channelamp #soundqualitycaraudio

Seriously Overbuilt 💪 Drastically Underated 🏆 When 🫵 Only Want The Best ⭐️⭐️⭐️⭐️⭐️

#audiodynamics #vault12vmarketing #basshead #bassheadnation #spl #xseriesamp

Hottest Selling Amplifier 🔥 Only 7.8"x4.5"x2" 😲 Clip indicators by each level Control 😎 High Level and Signal Sense Capable 👌

#audiodynamics #vault12vmarketing #caraudio #4channelamplifier #soundqualitycaraudio

The DSP68-AT makes it easy to create incredible so

The DSP68-AT makes it easy to create incredible sounding SQ systems🏆🎶🎵🎶🎵🎶

Auto tune and adjust the amplitude of each speaker for a great start OR turn on all of the parametric EQ adjustments and fine tune using your chosen RTA and microphone set up.

#audiodynamics #vault12vmarketing #DSP #dsptuning #audiophile #soundqualitycaraudio

Master Series M15 15″ subwoofer 15.75″ (400

Master Series M15 15″ subwoofer

15.75″ (400 mm) Subwoofer – dual 4 ohm
Custom tooled cast frame
3″ (76.2mm) copper voice coil on aluminum former for extreme power handling and motor force
Dual gap motor with aluminum shorting rings for maximum motor force over stoke which delivers world class dynamics and impact
+/- 20mm of linear excursion
Rubber surround
Push pin terminals
1,200 Watts RMS power handling*
Available in d2 and d4
Sold individually

* Power rating is based on 3.0cu.ft. sealed enclosure. Power handling will decrease as airspace increases with the benefit of a lower frequency roll-off (increased output below 40Hz).

The Master Series M15 subwoofer is a high stroke, low distortion subwoofer tailored for moderate to large sealed applications and infinite baffle. The M15 uses a composite fiber cone with a dual gap magnetic structure. The M15 yields 40mm of peak to peak linear excursion and 65mm peak to peak mechanical excursion. The 76.2mm diameter voice coil with aluminum former ensures high power handling.

The M15 uses a ferrite magnet of Y35 grade. With the machined 1010 grade steel for the yoke and washers, the resulting in-gap field strength is 0.5 Telsa. The dual 2 layer (total of 4 layers) pure copper voice coil configuration offered in 2 and 4 Ohm nominal per voice coil offers a range of impedances from 1 to 8 Ohms.

The 38mm thick dual gap top plate assembly features a 20mm tall and 14mm deep rebate. This allows for extended travel and greatly flattened BL (motor force) over stroke. The rebate is filled with a 3.5mm thick aluminum ring to reduce inductance resulting in a usable bandwidth to 1 kHz, for exceptional transient performance.

Master Series M15 15″ subwoofer 15.75″ (400

Master Series M15 15″ subwoofer

15.75″ (400 mm) Subwoofer – dual 4 ohm
Custom tooled cast frame
3″ (76.2mm) copper voice coil on aluminum former for extreme power handling and motor force
Dual gap motor with aluminum shorting rings for maximum motor force over stoke which delivers world class dynamics and impact
+/- 20mm of linear excursion
Rubber surround
Push pin terminals
1,200 Watts RMS power handling*
Available in d2 and d4
Sold individually

* Power rating is based on 3.0cu.ft. sealed enclosure. Power handling will decrease as airspace increases with the benefit of a lower frequency roll-off (increased output below 40Hz).

The Master Series M15 subwoofer is a high stroke, low distortion subwoofer tailored for moderate to large sealed applications and infinite baffle. The M15 uses a composite fiber cone with a dual gap magnetic structure. The M15 yields 40mm of peak to peak linear excursion and 65mm peak to peak mechanical excursion. The 76.2mm diameter voice coil with aluminum former ensures high power handling.

The M15 uses a ferrite magnet of Y35 grade. With the machined 1010 grade steel for the yoke and washers, the resulting in-gap field strength is 0.5 Telsa. The dual 2 layer (total of 4 layers) pure copper voice coil configuration offered in 2 and 4 Ohm nominal per voice coil offers a range of impedances from 1 to 8 Ohms.

The 38mm thick dual gap top plate assembly features a 20mm tall and 14mm deep rebate. This allows for extended travel and greatly flattened BL (motor force) over stroke. The rebate is filled with a 3.5mm thick aluminum ring to reduce inductance resulting in a usable bandwidth to 1 kHz, for exceptional transient performance.

Master Series speakers were designed with no budge

Master Series speakers were designed with no budget restriction which resulted in world class sound quality and industry leading performance.🎵🎶🎵🎶

Visit our website adcaraudio and read about the materials and technologies used to create the phenomenal Master Series!

Stay tuned for videos featuring the master engineer 😁

#audiodynamics #audiophile #soundquality #meca #iasca #usac #caraudio #vault12vmarketing #carspeakers

Load More... Follow on Instagram

7574 Hwy F, Farmington, MO, 63640

Cart
Checkout
My Account
Mobile Showroom
Dealer Locator