Description
Every X Series amplifier undergoes testing before it is packaged to confirm they work as intended. First, the crossover functions and a clean high output sine wave are confirmed to be within specification. Then, the amplifier is wired to a resistor bank and driven with a very high signal to drive the amp into thermal protection. The amp is cycled back on and is again tested for a clean high output sine wave.
Continuous Power | 1500W x 1 @ 4 ohms |
At 14.4V Supply Voltage | 2600W x 1 @ 2 ohms |
4000W x 1 @ 1 ohm | |
Frequency Response | 13Hz – 257Hz |
Input Sensitivity | 0.4V to 6V |
Fuse Ratings | 150A @ 4 ohms / 250A @ 2 ohms / 400A @ 1 ohm |
Filter Modes | Subsonic and Low Pass |
Subsonic Filter @ 24dB/Oct | 10Hz – 50Hz |
![]() |
|
Low Pass Filter @ 24dB/Oct | 35Hz – 250Hz |
![]() |
|
Detented Filter Potentiometers | 41 Click-in-Place Frequencies |
Remote Level Control w/ Clip Indicator / Voltage / Temperature | Included |
Pass-Through Output | Yes |
Height | 3.12 in / 79 mm |
Width | 10.59 in / 269 mm |
Length (Heat Sink) | 16.53 in / 420 mm |
Net Weight | 26 lb / 11.8 kg |
Amp Dyno Numbers
Amp Dyno Numbers
Amp Dyno Numbers
Amp Dyno Numbers